Weblog maken?


MaakEenWebsite.nl (tip)
Totaal slechts 10 euro per maand incl. domeinnaam en gratis overzetten van uw bestaande weblog bij Bloggers.nl 100 MB ruimte
emailadres
Lees meer..... en bestel
Gratis geld verdienen met e-mails lezen? Meld je aan bij
Zinngeld, Surfrace, Qassa en Euroclix !

Op zoek naar God?

Jennifer's blog

19/7/2013 - iTaste MVP stopped firing after a week

iTaste MVP stopped firing after a week Results 1 to 4 of 4 35 iTaste MVP stopped firing after a week Not much to say except its only been a week and Smoke-free ! What Takes Place When You Stop Smoking. im not very happy at all. Just using it while relaxing and bam. Stops firing but everything still works. Have you tried pulling the post on whatever top you are using? eRoll - 36mg 572 It could be 2 things. 1- As per above, it's not making contact with your atty /clearo/or what ever, try pulling the center post of your tank/ atty / what ever, up a little 2- I read some where that the negative (i think) wire had fell off, so the guy took it apart, reconnected the wire and away it went...
SOURCE: http://www.e-cigarette-forum.com/forum/ecigarette-technical-issues/433726-itaste-mvp-stopped-firing-after-week.html and MYKA's ECIG Reviews
Comments (0) :: Post A Comment! :: Permanent Link

19/7/2013 - iTaste MVP stopped firing after a week

iTaste MVP stopped firing after a week Results 1 to 4 of 4 35 iTaste MVP stopped firing after a week Not much to say except its only been a week and Smoke-free ! What Takes Place When You Stop Smoking. im not very happy at all. Just using it while relaxing and bam. Stops firing but everything still works. Have you tried pulling the post on whatever top you are using? eRoll - 36mg 572 It could be 2 things. 1- As per above, it's not making contact with your atty /clearo/or what ever, try pulling the center post of your tank/ atty / what ever, up a little 2- I read some where that the negative (i think) wire had fell off, so the guy took it apart, reconnected the wire and away it went...
SOURCE: http://www.e-cigarette-forum.com/forum/ecigarette-technical-issues/433726-itaste-mvp-stopped-firing-after-week.html and MYKA's ECIG Reviews
Comments (0) :: Post A Comment! :: Permanent Link

17/7/2013 - ***please help*** cartomizers will not screw into my battery

***please help*** cartomizers will not screw into my battery Results 1 to 3 of 3 22 ***please help*** cartomizers will not screw into my battery I read this have an Ego-t 650mah, like the flute title says I can NOT get any cartomizer to screw in my battery. They don't seem to catch the threads, almost like they are not there, can i fix this??? Please help
SOURCE: http://www.e-cigarette-forum.com/forum/ecigarette-technical-issues/440465-please-help-cartomizers-will-not-screw-into-my-battery.html and MYKA's ECIG Reviews
Comments (0) :: Post A Comment! :: Permanent Link

16/7/2013 - Voltage/resistance matching?

Voltage/resistance matching? 89 Voltage/resistance matching? I have only used KR-808 batteries, and I primarily use CE3's. The regular cartos I have used were from the same manufacturer as the batteries they went on, and did not even list the resistances. I was looking into getting some different cartos and am seeing conflicting info. I was wondering if someone could clear this up for me. ECblend is saying this: Low to Standard Resistance measures 1.25 - 2.7 ohms. Lower resistance tank cartomizers provide greater heat and vapor which results in greater throat hit. Low Resistance Cartomizers are NOT recommended for thin, pen-style devices. They will work but can damage the battery and web site lower the expected life of the battery. iKenVape is saying this: For all of the reasons why you love and adore the Mega 808 STD on 5V, you will find even more to love to give when you fire up one of these babies on your favorite 3.7V device! Rated at 1.8-2.0 resistance and Recommended for 3.4-4.2V Disclaimer not needed as 1.8? is safe range for all devices on the market. 901 Compatible So basically I want to know what is the lowest resistance level recommended for a KR808 batteries that will not harm them, or shorten their lifespan?
SOURCE: http://www.e-cigarette-forum.com/forum/ecigarette-technical-issues/432225-voltage-resistance-matching.html and MYKA's ECIG Reviews
Comments (0) :: Post A Comment! :: Permanent Link

16/7/2013 - ***please help*** cartomizers will not screw into my battery

***please help*** cartomizers will not screw into my battery Results 1 to 3 of 3 22 ***please help*** cartomizers will not screw into my battery I have an Ego-t 650mah, like the flute title says I can NOT get any cartomizer to screw in my electronic cigarette free starter kit battery. They don't seem to catch the threads, almost like they are not there, can i fix this??? Please help
SOURCE: http://www.e-cigarette-forum.com/forum/ecigarette-technical-issues/440465-please-help-cartomizers-will-not-screw-into-my-battery.html and MYKA's ECIG Reviews
Comments (0) :: Post A Comment! :: Permanent Link

15/7/2013 - Sigelei Zmax Telescope says short?

Sigelei Zmax Telescope says short? Results 1 to 2 of 2 9 Sigelei Zmax Telescope says short? my zmax has stopped working I was using it How To Eliminate Facial Wrinkles Due To Gasper Smoke. just fine and then gave me a low load so I switched cartomizers and then gave me a 'short' reading, what can cause this is it broken finally after only using it like 10 times? I switched batteries and everything and I don't know what to do
SOURCE: http://www.e-cigarette-forum.com/forum/ecigarette-technical-issues/438899-sigelei-zmax-telescope-says-short.html and MYKA's ECIG Reviews
Comments (0) :: Post A Comment! :: Permanent Link

14/7/2013 - iTaste MVP stopped firing after a week

iTaste MVP stopped firing after a week Results 1 to 4 of 4 20 iTaste MVP stopped firing after a week Not much to say except its only been a week and im not very happy at all. Just using it [link] while relaxing and bam. Stops firing but everything still works. Have you tried pulling the post on whatever top you are using? eRoll - 36mg 572 It could be 2 things. 1- As per above, it's not making contact with your atty /clearo/or what ever, try pulling the center post of your tank/ atty / what ever, up a little 2- I read some where that the negative (i think) wire had fell off, so the guy took it apart, reconnected the wire and away it went...
SOURCE: http://www.e-cigarette-forum.com/forum/ecigarette-technical-issues/433726-itaste-mvp-stopped-firing-after-week.html and MYKA's ECIG Reviews
Comments (0) :: Post A Comment! :: Permanent Link

14/7/2013 - Voltage/resistance matching?

Voltage/resistance matching? 88 Voltage/resistance matching? I have only used KR-808 batteries, and I primarily use CE3's. The regular cartos I have used were from the same manufacturer as the batteries they went on, and did not even list the resistances. I was looking into getting some different cartos and am seeing conflicting info. I was wondering if someone could clear this up for me. ECblend is saying this: Low to Standard Resistance measures 1.25 - 2.7 ohms. Lower resistance tank cartomizers provide greater heat and vapor which results in greater throat hit. Low Resistance Cartomizers are NOT recommended for thin, pen-style devices. They will work but can visit this page damage the battery and lower the expected life of the battery. iKenVape is saying this: For all of the reasons why you love and adore the Mega 808 STD on 5V, you will find even more to love to give when you fire up one of these babies on your favorite 3.7V device! Rated at 1.8-2.0 resistance and Recommended for 3.4-4.2V Disclaimer not needed as 1.8? is safe range for all devices on the market. 901 Compatible So basically I want to know what is the lowest resistance level recommended for a KR808 batteries that will not harm them, or shorten their lifespan?
SOURCE: http://www.e-cigarette-forum.com/forum/ecigarette-technical-issues/432225-voltage-resistance-matching.html and MYKA's ECIG Reviews
Comments (0) :: Post A Comment! :: Permanent Link

13/7/2013 - Kick died

Kick died 87 Kick died So visit the website I bought a kick when they first came out. I used it for like a month and it started to fire inconsistently. I had it in a SIlver Bullet. It got to where I had to tap the bottom of the sb to get it to fire again. Then it started to peter out. Like, hit the button and it would go ----- ----------------- --- --- --- - - (& lt ; if that helps) then it wouldnt fire at all no matter what I did with it or what mod it was in. Has it died forever or is there something I can do to bring it back to life? "Death feared him because he had the heart of a lion..." -Arabian proverb Are you sure it is the kick? My sb and kick suffered the same problem and I solved it by disassembling and submerging the sb in rubbing alcohol. It turns out the switch was getting dirty. Sent from my SAMSUNG-SGH-I747 using Tapatalk 4 Beta Current Pv's : Nzonic v3 and nimbus, Zenesis Sidewinder, Provari Standard with Zap, Provari mini with Custom Genesis Ahh just reread your post I have had 2 kicks just stop working... they seem to have a rather short life from my experiences. Sent from my SAMSUNG-SGH-I747 using Tapatalk 4 Beta Current Pv's : Nzonic v3 and nimbus, Zenesis Sidewinder, Provari Standard with Zap, Provari mini with Custom Genesis
SOURCE: http://www.e-cigarette-forum.com/forum/ecigarette-technical-issues/430310-kick-died.html and MYKA's ECIG Reviews
Comments (0) :: Post A Comment! :: Permanent Link

13/7/2013 - Sigelei #19 potential LED switch mod, have some technical questions.

Sigelei #19 potential LED switch mod, have http://www.myka.tv/the-correct-way-to-give-up-smoking-smoke-free-2/ some technical questions. Results 1 to 2 of 2 1,116 Sigelei #19 potential LED switch mod, have some technical questions. In the Sigelei mechanicals thread I saw somebody attempting to alter their #20 with a switch similar to these: Metal Push Button w Annular LED Indicator Blue Momentary Type | eBay I'm interested in doing something similar to my #19 but I'm not sure it would be possible because of the LED voltage requirement. The lowest voltage number I can find is 5-6 and I know my batteries don't put that out without some additional electronics. If somebody familiar with electronics could point me in the right direction or give some advice I would really appreciate it. Any suggestions will have to be in plain, non-technical English. I'm by no means any kind of technician.
SOURCE: http://www.e-cigarette-forum.com/forum/ecigarette-technical-issues/433237-sigelei-19-potential-led-switch-mod-have-some-technical-questions.html and MYKA's ECIG Reviews
Comments (0) :: Post A Comment! :: Permanent Link

7/7/2013 - RSST wont get below 1.8 max

I have re wrapped thus thing 4 or 5 times alreay. Tried oxidizing the electric vapor cigarette mesh wick more and more times. Trued a twisted wire wrap. Im only using 3 wraps around the wick. But still getting around 2.0 at best. It works better on my vamo then my mech mod. My kanger pros are destroying it. Im really excited to see what it can do but just cant get it there. 3 oranage coils on a nice black wick and still half assed. I know its not a short issue, im using an rsst rba tank. Everything is isolated. Any thoughts? The mech is measuring at over 4v. I should be able to get a decent vape. Right? Edit...32g wire on 400ss mesh tube rolled with high pg liquid...vamo at 7-9w
SOURCE: http://www.e-cigarette-forum.com/forum/ecigarette-technical-issues/416944-rsst-wont-get-below-1-8-max.html and MYKA's ECIG Reviews
Comments (0) :: Post A Comment! :: Permanent Link

7/7/2013 - RSST wont get below 1.8 max

I have re wrapped thus thing 4 or 5 times alreay. Tried oxidizing the electric vapor cigarette mesh wick more and more times. Trued a twisted wire wrap. Im only using 3 wraps around the wick. But still getting around 2.0 at best. It works better on my vamo then my mech mod. My kanger pros are destroying it. Im really excited to see what it can do but just cant get it there. 3 oranage coils on a nice black wick and still half assed. I know its not a short issue, im using an rsst rba tank. Everything is isolated. Any thoughts? The mech is measuring at over 4v. I should be able to get a decent vape. Right? Edit...32g wire on 400ss mesh tube rolled with high pg liquid...vamo at 7-9w
SOURCE: http://www.e-cigarette-forum.com/forum/ecigarette-technical-issues/416944-rsst-wont-get-below-1-8-max.html and MYKA's ECIG Reviews
Comments (0) :: Post A Comment! :: Permanent Link

6/7/2013 - Noble 1: Juice leaking on battery through center post. How to fix it?

I love my Noble 1, but I have a recurring issue with juice leaking into the battery through the center post. I tried several fixes (tightening, loosening center post, adding second o-ring,...) but to no http://www.myka.tv/how-it-is-possible-to-get-somebody-to-stop-smoking/ avail. It's not like it's flooding, but every time I take of the atomizer, there is a drop or two on the battery: not very nice. Also, it seems to get worse as the juice gets lower in the tank. Has anyone here experienced the same problem and found a way to fix it? Thanks for looking, and for your help :)
SOURCE: http://www.e-cigarette-forum.com/forum/ecigarette-technical-issues/417831-noble-1-juice-leaking-battery-through-center-post-how-fix.html and MYKA's ECIG Reviews
Comments (0) :: Post A Comment! :: Permanent Link

6/7/2013 - why do I keep melting my Poldiac springs?

Hey folks, I just got a Poldiac Why You Should Choose V2 Discount coupon Code v2 cigs from MMvapors and I keep melting my bottom cap spring. The button is not getting stuck, but they still melt? Any suggestions? Thanks
SOURCE: http://www.e-cigarette-forum.com/forum/ecigarette-technical-issues/416793-why-do-i-keep-melting-my-poldiac-springs.html and MYKA's ECIG Reviews
Comments (0) :: Post A Comment! :: Permanent Link

6/7/2013 - why do I keep melting my Poldiac springs?

Hey folks, I just got a Poldiac Why You Should Choose V2 Discount coupon Code v2 cigs from MMvapors and I keep melting my bottom cap spring. The button is not getting stuck, but they still melt? Any suggestions? Thanks
SOURCE: http://www.e-cigarette-forum.com/forum/ecigarette-technical-issues/416793-why-do-i-keep-melting-my-poldiac-springs.html and MYKA's ECIG Reviews
Comments (0) :: Post A Comment! :: Permanent Link

5/7/2013 - Ego-C upgrade Flashing White Light

I have had my ego c for about 6 months & it has never given me any problems. Today between drags it randomly flashes a white light three times. I know that when it is off Why You Should Choose V2 Discount coupon Code v2 cigs and I hold it down it changes the frequency and the color switches from blue to yellow...and that is not what is happening. I also know that when it is dying it flashes the blue light multiple times, also not what is happening. I am just trying to figure out if something is wrong? Or if I have it on some weird mode that I am not aware of? It doesn't happen each time...maybe every 20-30 times I vape. Does anyone know what is up? ***CORRECTION-I thought it was white, but the blinking is actually blue. Also this is happening when I FIRST push the button. I can't vape when it is doing this. Just flashes three times then is off until I press it again and then I can vape. I see a lot of people have looked at this thread but no responses still =/ does anyone know what is going on?!?!
SOURCE: http://www.e-cigarette-forum.com/forum/ecigarette-technical-issues/426373-ego-c-upgrade-flashing-white-light.html and MYKA's ECIG Reviews
Comments (0) :: Post A Comment! :: Permanent Link

5/7/2013 - Noble 1: Juice leaking on battery through center post. How to fix it?

I love my Noble 1, but I have a recurring issue with juice leaking into the battery through the center post. I tried several fixes (tightening, loosening center post, adding second o-ring,...) but to no avail. It's not like it's flooding, but every time I take of the atomizer, there is a drop or two on the battery: not Premium Cigarettes At Discount Cost. very nice. Also, it seems to get worse as the juice gets lower in the tank. Has anyone here experienced the same problem and found a way to fix it? Thanks for looking, and for your help :)
SOURCE: http://www.e-cigarette-forum.com/forum/ecigarette-technical-issues/417831-noble-1-juice-leaking-battery-through-center-post-how-fix.html and MYKA's ECIG Reviews
Comments (0) :: Post A Comment! :: Permanent Link

4/7/2013 - Help !! Vamo v2 SS, EvoD & Smoktek Neptune nova

Sup Fellas !! Need some help & advice. I bought from mvs the following Vamo moved here v2, evoD and a smoktek neptune nova. Out of the box everything seems to be working perfectly. I adjusted the vamo to no2 mode and 8.5w. Last Night. This morning: 1. Evod and nova tank taste burnt when using with the vamo. 2. I noticed this last night but with all the exitement I kinda disregard what I noticed from the vamo: A: Once I screw the evod, nova tank and my drip atty , I noticed a slight movement like if it was loose(tank and atty ). B: Sometimes it fires sometimes it doesnt, for it to fire I need to move tank and attys until I can start vaping. 3. EvoD bottom coil now stays in the vamo (making a huge mess). Im totally frustrated !!!
SOURCE: http://www.e-cigarette-forum.com/forum/ecigarette-technical-issues/426417-help-vamo-v2-ss-evod-smoktek-neptune-nova.html and MYKA's ECIG Reviews
Comments (0) :: Post A Comment! :: Permanent Link

3/7/2013 - Ego-C upgrade Flashing White Light

I have had my ego c for about 6 months & it has never given me any problems. Today between drags it randomly flashes a white light three times. I know that when it is off and I hold it down it changes the frequency and the color switches from blue to yellow...and that is not what is happening. I also know that when it is dying it flashes the blue light multiple times, also not what is happening. I am just trying to figure out if something is wrong? Or if I have it on some http://www.myka.tv/whatever-you-do-do-not-just-walk-away/ weird mode that I am not aware of? It doesn't happen each time...maybe every 20-30 times I vape. Does anyone know what is up? ***CORRECTION-I thought it was white, but the blinking is actually blue. Also this is happening when I FIRST push the button. I can't vape when it is doing this. Just flashes three times then is off until I press it again and then I can vape. I see a lot of people have looked at this thread but no responses still =/ does anyone know what is going on?!?!
SOURCE: http://www.e-cigarette-forum.com/forum/ecigarette-technical-issues/426373-ego-c-upgrade-flashing-white-light.html and MYKA's ECIG Reviews
Comments (0) :: Post A Comment! :: Permanent Link

30/6/2013 - iClear30 won't make connection on ProVari

Help? I'm trying to help one of my customers that uses a ProVari. I don't have a ProVari, so http://www.myka.tv/the-basics-e-cigarette-products-you-required/ it make it difficult. The iClear 30 will not make contact on his mod. On most mods you can pull up the center pin, but from what I can tell, this cannot be done on the ProVari. Any suggestions or similar experiences?
SOURCE: http://www.e-cigarette-forum.com/forum/ecigarette-technical-issues/417167-iclear30-wont-make-connection-provari.html and MYKA's ECIG Reviews
Comments (0) :: Post A Comment! :: Permanent Link

<- Last Page :: Next Page ->

About Me



«  June 2018  »
MonTueWedThuFriSatSun
 123
45678910
11121314151617
18192021222324
252627282930 

Links

Home
View my profile
Archives
Friends
Email Me

Friends

Hosting door HQ ICT Systeembeheer