Weblog maken?

MaakEenWebsite.nl (tip)
Totaal slechts 10 euro per maand incl. domeinnaam en gratis overzetten van uw bestaande weblog bij Bloggers.nl 100 MB ruimte
Lees meer..... en bestel
Gratis geld verdienen met e-mails lezen? Meld je aan bij
Zinngeld, Surfrace, Qassa en Euroclix !

Op zoek naar God?

China valve inspection service

What Is Quality Control?

{ 07:44, 9/3/2018 } { 0 comments } { Link }

Quality control (QC) is a set of actions carried out to determine the effectiveness of a performed service or manufactured product. A defined set of guidelines is followed to ensure a service or product matches the desired level of steel plate check to meet the needs of the customer or client. The process of quality control relies on a team of workers thoroughly testing and examining the function, usability, safety and dependability of a certain service or product.

Role of the quality control team

A business that relies on quality control, usually employs an internal or external team of workers to obverse a provided service or fully test a set number of products. This type of work is done at random with one or more product individually selected by the team to inspect. In the event of the service or product not meeting the specified standards identified by the company, the pump inspection testing team often has the ability to stop production until a full investigation has been completed and issues rectified. If a serious fault is detected, it is possible that production or a service is put on a permanent hold until major changes have been implemented.

Who corrects the quality issues?

It isn't the responsibility of the flow meter valve inspection team to rectify the faults detected during the investigation. The work is passed on to another team who give the service or production further examination to determine the severity of the defect and what can be done to fix it. Once the issues are repaired to a high and satisfactory standard, the service can continue as before or production returned to usual.

What businesses use quality checks?

A number of businesses use the services of the professionals to carry out quality checks. For instance, the food manufacturers rely on testers to inspect and taste the final product. Manufacturers of clothing have employees to look over the articles of clothing to ensure it is well made and properly sewn. In the pharmaceutical sector, the employees will inspect the final products to check for accuracy, contamination, or general detects.

Businesses that are more service-oriented will use employees to make sure the services are performed to a high standard heat treat testing and to the customer's satisfaction. Service-oriented inspections also include evaluating the members of staff. A business with poorly trained, misinformed or un-skilled workers that have difficulty understanding instructions will have a negative impact on the all-round service provided to customers.


Organize the Factory Audit for Lower Costs

{ 07:24, 3/11/2017 } { 0 comments } { Link }

Some companies that imported from Asia have set up local offices to conduct factory audit. Others have secured the quality of their imports by hiring a large QC company. Together, buyers and QC companies have organized the supply chain to fit their needs.

A lot of audits take place after the production finishes third party inspection services and just before shipment. If an audit fails, the factory has to reproduce and then they also need to pay for a re-inspection. The QC companies perform audits in a very in efficient way. They just send the inspectors to a factory and pass their photos and notes to the typists, who finally write the report. Product inspections are a way to collect samples for lab-tests. And a factory audit is invoiced at double the price of a product check, even though it is simpler and less risky. Then the client gets the final report one or two days after the audit.

This was reasonable about ten years ago. Factories are kept under pressure since they see the inspectors as the "cops". But now the situation is different, and the traditional QC offer is not adapted for many importers. First, now it is easier to source from Asia and thousands of smaller companies have joined the game. Second, Trading companies are slowly pushed aside since the buyers want to go direct to the factory globe valve inspection services  and get better pricing. Third, the large QC companies often do not have the competence to help a factory set up their factory audit processes.

Now the established corporations refuse to offer low-cost inspections of standard items and they are not organized for assistance in production of highly complex products. And now the real case is that only 20% of shipments are audited professionally. Thus, millions of products are recalled every year and full containers are thrown away after delivery.

So it is wise to organize the factory audit before shipment, because it can save your cost in the future and you do not need to worry about that the goods are not accepted by importers.
For many supply chain auditors who work in multinational companies, factory audit is a business; but it seems that as time goes by, it is more and more difficult to do this business well. Five years ago, the auditing fee for a factory is about US$3000, but now, it is only US$1000. The price for a factory audit is just like the single purchase price of supply chain products - it becomes lower non destructive testing services and lower.

An audit is a kind of inspection which is carried out by the multinational companies to examine if the factory meets the production requirements. Now multinational companies will either send their own COC or auditors out to perform this task.

I was lucky enough to read some auditing reports from several famous business audit companies, in which the destiny of a factory was determined by only a few words. And it was obvious that the auditing reports did not include enough information.

The factory management personnel make complaints about that the auditors do not have enough communication with them because they are not willing to. And also some auditors will ask the factory valve inspection report for money directly and then they write the report. If a little money can change the destiny of a factory, it is no doubt that most factories will be happy to pay for that.

In the past, factory audit mode was being scolded by many NGOs and publics, because they were not open and transparent enough. And it was helpless for improving the workers' working environment. Now the case still continues, if nothing changes, the factory audit will have no future and go to its end.

Testing and Inspection Services for Industries

{ 06:22, 2/11/2017 } { 0 comments } { Link }

Are you in the power, oil, gas and the construction and fabrication industries? Then you will be needing a testing and inspection service to ensure your company adheres to all of the safety standards. These inspection service companies can provide a complete inspection and testing service that covers all aspects of testing required by the industry, ranging from mechanical testing to pressure vessel inspections.

Mechanical testing is one of the many services provided by quality control services providers and is used to gain information or to ensure compliance of one or more properties of a material.

These companies can carry out a variety of destructive and non-destructive tests on products for performance and compliance purposes, depending on the material specifications. These tests include hardness testing, tensile testing, break, bend and weld tests and the widely applied charpy impact test. The results from these tests are commonly used to select a material for an application, material identification, quality control and material certification. All of the mechanical tests conducted are carried out in accordance with Australian standards, however inspection companies can develop customised plans or develop methods to meet specific standards or customers own requirements.

An important inspection service provided is the welder and weld procedure qualifications. These tests determine the compliance and suitability of the weld procedure through various destructive and non-destructive tests which include break and bend tests, hardness testing and macroscopic examinations (macro tests). Macroscopic examinations are used to assess weld quality and can be applied to a variety of samples in accordance with all common test specifications and weld procedure qualifications.

In addition to these third party inspection services can conduct welder qualifications to assess the welders ability to produce welds that are acceptable to the requirements of the specifications they will be working under. They can also offer fast turnarounds on large quantities of welder qualifications.

In conjunction with the testing and inspection of various materials there is also the option of accurately identifying any unknown metallic material by utilising various test methods including the latest in X-Ray fluorescent technology (XRF). Material identification is required for the selection of consumables to weld a given type of steel, to sort unknown or mixed materials or to ensure the correct material has been used for a specific purpose.

A high percentage of testing and inspection services companies highly value their commitment to customer satisfaction which can be demonstrated through their high level of personalised globe valve inspection services , fast turnaround times as well as efficient, cost effective testing. Look for companies that are backed by experienced staff and state of the art equipment that are also highly accredited company receiving the NATA (National Association of testing authorities) world recognised accreditation.

All of the testing and inspection services provided by testing and inspection service companies have been designed to ensure maximum compliance with industry safety standards, requirements and specifications. They can test, inspect, identify, and qualify the safety and usability of relevant products, materials and procedures used in the power, oil, gas, construction and fabrication industries.

Complete Guide to Inspection Services

{ 06:27, 31/10/2017 } { 0 comments } { Link }

Home China valve inspection service are commonly arranged to provide professional opinions regarding the condition of houses being offered for sale. But the inspection services industry is much broader than the satisfaction of a purchase agreement contingency. And in fact a home inspection itself is less comprehensive than many readers might think. It does include much, as any nine-page checklist would indicate, but there are also specific and general items excluded from a standard inspection, and it behooves the customer to understand what they are.

This inspection services guide dwells primarily on quality control services extensions or additions available to customers. The generalist home inspector is qualified to provide some of these functions; others require an authorized specialist. In any case, to obtain the additional work typically requires an extra fee. We review first those services most closely related to home inspection, and then we look at those more on the periphery.

A very important service usually conducted as part of a home inspection is inspecting for wood-destroying pests. Because damage from termites, carpenter ants, and other insects is capable of compromising a house's entire structure, it is imperative that this detailed examination be included. It may be necessary to investigate the level of pest inspecting expertise various home inspectors possess, for there can be a wide range. You want someone who not only can recognize conditions that foster infestation but can also identify insect species from specimens, damage patterns, remains, and habitats.

There are other varieties of third party inspection services besides the standard, all offered by a home inspector. One variety is designed to assist an owner who isn't selling his home but simply has the goal of maintaining it in good condition and/or allaying worries that he might have major problems due to long-term neglect. Another variety is what I call the warranty inspection, targeted to buyers of newly constructed homes as they approach the first anniversary of their purchase, the presumed end of their builder's warranty; the idea is to discover all construction defects and build a complete punch list of them for the builder to fix at his expense. A third variety is the re-inspection, or verification inspection; here, the client is a homebuyer who has requested certain repairs to be made prior to closing and he wants the inspector to verify that the defects have been properly fixed. By the way, not all inspectors charge an additional fee for the warranty or re-inspection service.

As mentioned above, there are general, documented exclusions of mostly peripheral items from the standard inspection. Occasionally the client requests that specific items be included that are normally excluded. Usually the inspector is happy to oblige the request for an additional fee. Examples of such items are fences not attached to the house, retaining walls, swimming pools, detached buildings (including garages), and private wells.

Lately customers have expressed interest in energy audits either as stand-alone or add-on services. This requires a certified specialist and additional equipment such as infrared imaging devices; hence, many home inspectors do not offer the globe valve inspection services . The audit typically includes the measurement of infiltration, ex-filtration, insulation R-values, and "wasteful" uses of energy. There may be government or commercial incentives for having one's house audited.

Finally, there are inspection services for determining if harmful substances are on the property. Examples are tests for radon, asbestos, lead paint, mold, water quality, air quality, and soil quality. Some substances usually specifically excluded with corresponding language in contracts are urea formaldehyde, toxins, carcinogens, and noise. To provide these services requires special training and they may not be universally available.

About Me

My Profile
My Photo Album

«  March 2018  »



Recent Entries

What Is Quality Control?
Organize the Factory Audit for Lower Costs
Testing and Inspection Services for Industries
Complete Guide to Inspection Services


Hosting door HQ ICT Systeembeheer