Weblog maken?


MaakEenWebsite.nl (tip)
Totaal slechts 10 euro per maand incl. domeinnaam en gratis overzetten van uw bestaande weblog bij Bloggers.nl 100 MB ruimte
emailadres
Lees meer..... en bestel
Gratis geld verdienen met e-mails lezen? Meld je aan bij
Zinngeld, Surfrace, Qassa en Euroclix !

Op zoek naar God?
Carl's blog Home | Profile | Archives | Friends

Sigelei Zmax Telescope says short?19/7/2013
Sigelei Zmax Telescope says short? Results 1 to 2 of 2 9 Sigelei Zmax Telescope says short? my zmax has stopped working I was using it just fine and then gave me a low load so I switched cartomizers and then gave me a 'short' reading, what can cause this is it broken finally after only using it like 10 times? I switched batteries electronic cigarette vapor and everything and I don't know what to do
SOURCE: http://www.e-cigarette-forum.com/forum/ecigarette-technical-issues/438899-sigelei-zmax-telescope-says-short.html and MYKA's ECIG Reviews
0 Comments | Post Comment | Permanent Link

Sigelei Zmax Telescope says short?19/7/2013
Sigelei Zmax Telescope says short? Results 1 to 2 of 2 9 Sigelei Zmax Telescope says short? my zmax has stopped working I was using it just fine and then gave me a low load so I switched cartomizers and then gave me a 'short' reading, what can cause this is it broken finally after only using it like 10 times? I switched batteries electronic cigarette vapor and everything and I don't know what to do
SOURCE: http://www.e-cigarette-forum.com/forum/ecigarette-technical-issues/438899-sigelei-zmax-telescope-says-short.html and MYKA's ECIG Reviews
0 Comments | Post Comment | Permanent Link

TW MK-II How to convert/repair?17/7/2013
TW MK-II How to convert/repair? Results 1 to 2 of 2 22 TW MK-II How to convert/repair? I started out vaping with a Prosmoke kit (mini auto I guess it's called?) and then started checking around and found Totally Wicked 's Screwdriver. Well I wasn't satisfied with http://www.myka.tv/v2-cigs-coupon-superior-v-2-coupon-codes-begin-smoking-smart/ what I had so I purchased a black SD and liked it alot. Later I wanted more power, so I decided to make a wood 5v Box Mod that I absolutely love, and I have been using that for several years now. I used the SD as a backup, but recently it stopped working when I pried up on the center post of the 901 atomizer connection and apparently broke the conductor inside the head. What I want to do now is get inside the head, repair the open circuit, replace the 901 connector with a 510 connector, and replace the battery spring with one that doesn't shrink at higher amps. That way I can run it with an IMR battery. If successful, I will also have a battery extension machined so I can run 18650 IMR's as well and incorporate a low battery light. I love the SD design, I just want to amp it up a bit so I can run higher current Genesis style rebuildable's and such. What I'm needing here is input on how the head comes apart. I see a seam near the top, is there anyone here that knows how that comes apart? I don't want to scratch the black anodizing trying to force it. If not, I may have to drill out the head and figure it out as I go.
SOURCE: http://www.e-cigarette-forum.com/forum/ecigarette-technical-issues/435466-tw-mk-ii-how-convert-repair.html and MYKA's ECIG Reviews
0 Comments | Post Comment | Permanent Link

TW MK-II How to convert/repair?16/7/2013
TW MK-II How to convert/repair? Results 1 to 2 of 2 22 TW MK-II How to convert/repair? I started out vaping with a Prosmoke kit (mini auto I guess it's called?) and then started checking around and found Totally Wicked 's Screwdriver. Well I wasn't satisfied with what I had so I purchased a black SD and liked it alot. Later I wanted more power, so I decided to make a wood 5v Box Mod that I absolutely love, and I have been using that for several years now. I used the SD as a backup, but recently it stopped working when I pried up on the center post of the 901 atomizer connection and apparently broke the conductor inside the head. What I want to do now is get inside the head, repair the open circuit, replace the 901 connector with a 510 connector, and replace the battery spring with one that doesn't shrink at higher amps. That way I can run it with an IMR battery. If successful, I will also have a battery extension machined so I can run 18650 IMR's as well and incorporate a low battery light. I love the SD design, I just want to amp it up a bit so I can run higher current Genesis style e-cigarette rebuildable's and such. What I'm needing here is input on how the head comes apart. I see a seam near the top, is there anyone here that knows how that comes apart? I don't want to scratch the black anodizing trying to force it. If not, I may have to drill out the head and figure it out as I go.
SOURCE: http://www.e-cigarette-forum.com/forum/ecigarette-technical-issues/435466-tw-mk-ii-how-convert-repair.html and MYKA's ECIG Reviews
0 Comments | Post Comment | Permanent Link

Kick died16/7/2013
Kick died 87 Kick died So I bought a kick when they first came out. I used it for like a month and it started to fire inconsistently. I had it in a SIlver Bullet. It got to where I had to tap the bottom of the sb to get it to fire again. Then it started to peter out. Like, hit the button and it would go ----- ----------------- --- --- --- - - (& lt ; if that helps) then it wouldnt fire at all no matter what I did with it or what mod it was in. Has it died forever or is there something I can do to bring it back to life? "Death feared him because he had the heart of a lion..." -Arabian proverb Are you sure it is the kick? My sb and kick suffered the same problem and I solved it by disassembling and submerging the sb in rubbing alcohol. It turns out the switch was getting dirty. Sent from my SAMSUNG-SGH-I747 using Tapatalk 4 Beta Current Pv's : Nzonic v3 and nimbus, Zenesis electronic cigarettes best Sidewinder, Provari Standard with Zap, Provari mini with Custom Genesis Ahh just reread your post I have had 2 kicks just stop working... they seem to have a rather short life from my experiences. Sent from my SAMSUNG-SGH-I747 using Tapatalk 4 Beta Current Pv's : Nzonic v3 and nimbus, Zenesis Sidewinder, Provari Standard with Zap, Provari mini with Custom Genesis
SOURCE: http://www.e-cigarette-forum.com/forum/ecigarette-technical-issues/430310-kick-died.html and MYKA's ECIG Reviews
0 Comments | Post Comment | Permanent Link

Vmax - Device or button issue15/7/2013
Vmax - Device or button issue Results 1 to 1 of 1 255 Vmax - Device or button issue Thought I'd see if anyone had any thoughts here. Just this morning, my VMax stopped working.When I insert batteries I get the 123-456-789 display, but the button does nothing. I can only imagine the button is busted or something. I can't get any reaction (no light) so I can't cycle to the menus. Tried with both flat tops and nipple top batts. Tried both with cartos electronic cigarette flavor cartridges and without. I've already had one VMax crap out on me due to the button not working. That one, though, I just needed to hit at a certain angle or something. I can't get any response out of this whatsoever. I imagine I'm out of luck, but let me know if anyone has any thoughts. I looked around a bit, and the button issues are somewhat known, but I didnt find a fix.
SOURCE: http://www.e-cigarette-forum.com/forum/ecigarette-technical-issues/434671-vmax-device-button-issue.html and MYKA's ECIG Reviews
0 Comments | Post Comment | Permanent Link

Carto Tanks and 100% VG Juices14/7/2013
Carto Tanks and 100% VG Juices Results 1 to 4 of 4 18 Carto Tanks and 100% VG Juices So unfortunately I'm doomed to 100% VG juices dues to allergies and after learning to use a AGA-T2 for my at home vape, my clearos just haven't been cutting it when I'm on the go, so I got a Z2 Cartotank for my sidewinder and it vapes wonderfully... when it feeds, which is rarely without me forcing it. I punched 3 holes because I know how thick my juices are, but should I be punching 4? should I be slotting my cartos? any help anyone can give would be greatly appreciated You can try thinning out your juice with some distilled water. Sent from my XT875 using Tapatalk 2 Dilute your http://www.myka.tv/v2-cigs-coupon-prime-v-2-discount-coupon-is-a-way-to-cheap-and-healthy-smoking/ VG with 20% distilled water = viscosity of PG , problem solved I is a 100% VG user as well.
SOURCE: http://www.e-cigarette-forum.com/forum/ecigarette-technical-issues/432375-carto-tanks-100-vg-juices.html and MYKA's ECIG Reviews
0 Comments | Post Comment | Permanent Link

iTaste MVP stopped firing after a week14/7/2013
iTaste MVP stopped firing after a week Results 1 to 4 of 4 20 iTaste MVP stopped firing after a week Not much to say except its only been a week and im not very happy at all. Just using it while relaxing and bam. Stops firing but everything still works. Have you tried pulling the post on whatever top you are using? eRoll - 36mg 572 It could be 2 things. 1- As per above, it's not making contact with your atty /clearo/or what ever, try pulling the center post of your tank/ atty / what ever, up a little 2- http://www.myka.tv/how-to-eliminate-facial-wrinkles-due-to-gasper-smoke/ I read some where that the negative (i think) wire had fell off, so the guy took it apart, reconnected the wire and away it went...
SOURCE: http://www.e-cigarette-forum.com/forum/ecigarette-technical-issues/433726-itaste-mvp-stopped-firing-after-week.html and MYKA's ECIG Reviews
0 Comments | Post Comment | Permanent Link

TW MK-II How to convert/repair?13/7/2013
TW MK-II How to convert/repair? Results 1 to 2 of 2 22 TW MK-II How to convert/repair? I started out vaping with a Prosmoke kit (mini auto I guess it's called?) and then started checking around and found Totally Wicked 's Screwdriver. Well I wasn't satisfied with what I had so I purchased a black SD and liked it alot. Later I wanted more power, so I decided to make a wood 5v Box Mod that I absolutely love, and I have been using that for several years now. I used the SD as a backup, but recently see page it stopped working when I pried up on the center post of the 901 atomizer connection and apparently broke the conductor inside the head. What I want to do now is get inside the head, repair the open circuit, replace the 901 connector with a 510 connector, and replace the battery spring with one that doesn't shrink at higher amps. That way I can run it with an IMR battery. If successful, I will also have a battery extension machined so I can run 18650 IMR's as well and incorporate a low battery light. I love the SD design, I just want to amp it up a bit so I can run higher current Genesis style rebuildable's and such. What I'm needing here is input on how the head comes apart. I see a seam near the top, is there anyone here that knows how that comes apart? I don't want to scratch the black anodizing trying to force it. If not, I may have to drill out the head and figure it out as I go.
SOURCE: http://www.e-cigarette-forum.com/forum/ecigarette-technical-issues/435466-tw-mk-ii-how-convert-repair.html and MYKA's ECIG Reviews
0 Comments | Post Comment | Permanent Link

Provari 2.5 top cap is a little crooked.. Easy fix? or send it in?7/7/2013
Notice that over time my Provari 2.5 top cap has developed a very slight gap on one side, its a little crooked, hard to notice unless you have a tank on it and really look at it. Now its beginning to annoy me. Its about 3 months old. I know the caps are press fit and since the gap is so small and on only one side, Is there a easy quick fix? or is my only option v2 cigs coupon marvelous V2 Voucher Codes: Start Smoking Smart to send it in to Provape for warranty work? I tried to snap a pic of it below
SOURCE: http://www.e-cigarette-forum.com/forum/ecigarette-technical-issues/425855-provari-2-5-top-cap-little-crooked-easy-fix-send.html and MYKA's ECIG Reviews
0 Comments | Post Comment | Permanent Link

Noble 1: Juice leaking on battery through center post. How to fix it?6/7/2013
I love my Noble 1, but I have a recurring issue with juice leaking into the battery through the center post. I tried several fixes (tightening, loosening center post, adding second o-ring,...) but to no avail. It's not like it's flooding, but every time I take of the atomizer, there is a drop or two on the battery: not very nice. Also, it seems to get worse as the juice gets Stop Smoking How And Why, Smoke-free . lower in the tank. Has anyone here experienced the same problem and found a way to fix it? Thanks for looking, and for your help :)
SOURCE: http://www.e-cigarette-forum.com/forum/ecigarette-technical-issues/417831-noble-1-juice-leaking-battery-through-center-post-how-fix.html and MYKA's ECIG Reviews
0 Comments | Post Comment | Permanent Link

problem with my lavatube6/7/2013
hello,guys, i have problem with my lavatube lambo was working good and suddenly couldn't smoke...displaying 9.9A on the view site... digital display. please help me with this,thanks!!
SOURCE: http://www.e-cigarette-forum.com/forum/ecigarette-technical-issues/425266-problem-my-lavatube.html and MYKA's ECIG Reviews
0 Comments | Post Comment | Permanent Link

Bolt Mod not working5/7/2013
I bought a bolt mod about a week ago. They sold me an 18650 battery with it, I tried to put in the bt in my car and it seemed v2 cigs coupon loved V 2 Discount coupon Codes ? A Case for Better Smoking cigarettes too big so I brought it back in and they more less forced it on. It worked great... For about a day. Then I felt it start to get very hot. That shouldn't happen. Come to find out its supposed to take an 18500, I brought it back, tried the 18500 in the store and it worked. I got home and now it doesn't work unless the tank that's on it is only very partially threaded on. Anyone have any thoughts? I'm assuming a possible misfire, but not sure.
SOURCE: http://www.e-cigarette-forum.com/forum/ecigarette-technical-issues/421152-bolt-mod-not-working.html and MYKA's ECIG Reviews
0 Comments | Post Comment | Permanent Link

protank shorting?4/7/2013
i have a protank/ego-c and it has been awesome so far. im on my 3rd head and every once in a while E-Cigarettes: The Basic Mechanisms And Concepts i get a buzz on my lips and no fire from my coil but the light comes on. only way it goes away is if i pull the head and twist the lug that is insulated in the bottom. am i getting a short to the body some how? would think the silicone cup and glass would insulate ME at least. do i need to take it apart and move the coil? does this happen with ss mesh if it touches the body? its almost a metallic sensation, like sucking a penny. thanks
SOURCE: http://www.e-cigarette-forum.com/forum/ecigarette-technical-issues/424498-protank-shorting.html and MYKA's ECIG Reviews
0 Comments | Post Comment | Permanent Link

iClear30 won't make connection on ProVari3/7/2013
Help? I'm trying to help one of my customers that uses a ProVari. I electronic cigarette set don't have a ProVari, so it make it difficult. The iClear 30 will not make contact on his mod. On most mods you can pull up the center pin, but from what I can tell, this cannot be done on the ProVari. Any suggestions or similar experiences?
SOURCE: http://www.e-cigarette-forum.com/forum/ecigarette-technical-issues/417167-iclear30-wont-make-connection-provari.html and MYKA's ECIG Reviews
0 Comments | Post Comment | Permanent Link

Help !! Vamo v2 SS, EvoD & Smoktek Neptune nova30/6/2013
Sup Fellas !! Need some help & advice. I bought from mvs the following Vamo v2, evoD and a smoktek neptune nova. Out of the box everything seems to be working perfectly. I adjusted the vamo to no2 mode and 8.5w. Last Night. This morning: 1. Evod and nova tank taste burnt when using with the vamo. 2. I noticed this last night but with all the exitement I kinda disregard what I noticed from the vamo: A: Once I screw the evod, nova tank and my drip atty , I noticed a slight movement like if it was loose(tank and atty ). B: Sometimes it fires sometimes it doesnt, Stop Smoking Using Concentrated Oils. for it to fire I need to move tank and attys until I can start vaping. 3. EvoD bottom coil now stays in the vamo (making a huge mess). Im totally frustrated !!!
SOURCE: http://www.e-cigarette-forum.com/forum/ecigarette-technical-issues/426417-help-vamo-v2-ss-evod-smoktek-neptune-nova.html and MYKA's ECIG Reviews
0 Comments | Post Comment | Permanent Link

why do I keep melting my Poldiac springs?30/6/2013
Hey folks, I just got a Poldiac from MMvapors and I keep melting What Is Inside An E-Cigarette? my bottom cap spring. The button is not getting stuck, but they still melt? Any suggestions? Thanks
SOURCE: http://www.e-cigarette-forum.com/forum/ecigarette-technical-issues/416793-why-do-i-keep-melting-my-poldiac-springs.html and MYKA's ECIG Reviews
0 Comments | Post Comment | Permanent Link

protank shorting?29/6/2013
i have a protank/ego-c and it has been awesome so far. im on my 3rd head and every once in a while i get a buzz on my lips and no fire from my coil but the light comes on. http://www.myka.tv/how-to-stay-clear-of-electronic-cigarette-scams/ only way it goes away is if i pull the head and twist the lug that is insulated in the bottom. am i getting a short to the body some how? would think the silicone cup and glass would insulate ME at least. do i need to take it apart and move the coil? does this happen with ss mesh if it touches the body? its almost a metallic sensation, like sucking a penny. thanks
SOURCE: http://www.e-cigarette-forum.com/forum/ecigarette-technical-issues/424498-protank-shorting.html and MYKA's ECIG Reviews
0 Comments | Post Comment | Permanent Link

iClear30 won't make connection on ProVari28/6/2013
Help? I'm trying to help one of my customers that uses a ProVari. I don't have a Mom?s Smoking Is A Drag On The Healthiness Of The Fetus ? Give Up Smoking Today! ProVari, so it make it difficult. The iClear 30 will not make contact on his mod. On most mods you can pull up the center pin, but from what I can tell, this cannot be done on the ProVari. Any suggestions or similar experiences?
SOURCE: http://www.e-cigarette-forum.com/forum/ecigarette-technical-issues/417167-iclear30-wont-make-connection-provari.html and MYKA's ECIG Reviews
0 Comments | Post Comment | Permanent Link

iClear30 won't make connection on ProVari28/6/2013
Help? I'm trying to help one of my customers that uses a ProVari. I don't have a Mom?s Smoking Is A Drag On The Healthiness Of The Fetus ? Give Up Smoking Today! ProVari, so it make it difficult. The iClear 30 will not make contact on his mod. On most mods you can pull up the center pin, but from what I can tell, this cannot be done on the ProVari. Any suggestions or similar experiences?
SOURCE: http://www.e-cigarette-forum.com/forum/ecigarette-technical-issues/417167-iclear30-wont-make-connection-provari.html and MYKA's ECIG Reviews
0 Comments | Post Comment | Permanent Link

Page 1 of 8
Last Page | Next Page
Hosting door HQ ICT Systeembeheer